Mini Size DeskTop Autoclave Autoclave Class B For Clinic
This series is a kind of autoclave sterilizer, it takes steam as
medium, adopts efficient vacuum pumping system and vacuum pumping
repeatedly to achieve sterilization and drying effect. Applicable
to stomatology department, ophthalmology department, operating
room, supply room, dialysis room and other medical and health
departments, all packaged or unpackaged: solid instrument, class A
cavity instrument, implant instrument, dressing fabric, rubber
catheter, liquid and other articles sterilization.
Capacities: 1000, 1200 and 1500 liters
Pass-Through: Available throughout range
Section: Rectangular
Loading: Front
Heating Source: Integral/stand-alone steam generator or direct steam supply
Features
- Special design for BSL3 and BSL4 laboratories
- Extreme process reliability
- User-friendly HMI
- Parameters could be easy adjusted for perfect compliance with
customer requirements
- Efficient drying based on a high performance vacuum system
- Minimal media consumption
- Strictly isolated technologies adopted to ensure safety
- No recontamination for environment and human being
Parameters
Model | Chamber Size | Overall Size | Steam | Water | Power |
W*H*D mm | W*H*D mm | Kg/cycle | Kg/cycle | KVA |
MDL-1.0 | 680*1180*1250 | 1350*2000*1590 | 40 | 100 | 4 |
MDL-1.2 | 680*1180*1500 | 1350*2000*1840 | 45 | 120 | 4 |
MDL-1.5 | 680*1180*1870 | 1350*2000*2210 | 50 | 150 | 4.5 |
Biosafety And Waste Treatment Facilities
Medpharm supplies full sterilization solutions for the treatment of
bio hazardous materials and waste.
Medpharm autoclave sterilizers can be customized to meet the
specific requirements of laboratories
classified as BSL3/4 (Bio Contaminant Level 3 or 4) where harmful
pathogens and viruses that
leave the sterilizer prior to disposal must be fully sterilized.
The bio-hazardous waste sterilization cycle will efficiently
process any load without risk to the environment.
These autoclaves are supplied with a thermal effluent
decontamination stage that sterilizes chamber air and waste water
prior to their release into the atmosphere and drain.
An additional sterilization system is incorporated into the
autoclave which prevents bio-hazardous
aerosol generation.
During the air removal phase, the exhaust, aerosol and condensation
pass through a secondary sterilization treatment that sterilizes
the effluent.
During the heating and sterilization phases all effluent is not
allowed to exit the chamber until the sterilization phase is fully
complete.
Protecting People And The Environment
There are many types of materials in laboratories, hygiene
standards are extremely high. Perfect sterilization processes are
the prerequisite for safety in laboratory operation. Suitable
methods have to be used to validate sterilization processes in
terms of the desired effect, because perfect sterilization results
can only be achieved by precisely matching sterilization processes
to the material to be sterilized.
Brochure load down from here
Medpharm
medical large steam autoclave brochure.pdf
